APW7037A |
RFQ for APW7037A Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| APW7037A | - | - | - |
The APW7037 series are designed to provide a low cost synchronous Buck regulator for on-board DC to DC converter applications. The APW7037 series together with dual N-channel MOSFETs such as APM7313, provide a low cost solution for such applications. Each device features an internal 200/400kHz oscillator, Power-On-Reset (POR) for both VCC and VC supplies, an external programmable soft-start function as well as output under-voltage detection that latches off the device when an output short is detected.
Typical Application |
Features |
| • Graphics Cards• DDR Memory Power Supply• DDR Memory Termination Voltage• Low-Voltage Distributed Power Supplies | • Operating with Single 5V or 12V Input• Drives N-Channel MOSFETs• Simple Single-Loop Control Design − Voltage-Mode PWM Control − Full 0% to 100% Duty Ratio − Fast Transient Response• ±2% Output Voltage Accuracy Over Temperature• Under-Voltage Protection for Output• 200/400kHz Constant Frequency Operation -200kHz for APW7037 & APW7037B -400kHz for APW7037A• Small size, 8-PIN Package (SOIC or TSSOP)• Lead Free Available (RoHS Compliant) |
|
Description |
Rating |
Unit |
| VCC to GND |
-0.2~30 |
V |
| VC to GND |
-0.2~30 |
V |
| Operating Junction Temperature |
0~125 |
°C |
| Storage Temperature |
-65~150 |
°C |
| Soldering Temperature (10 Seconds) |
300 |
°C |
| Minimum ESD Rating |
±2 |
KV |
